| Pressure Calibrator - |
FEATURES :
- A Versatile Range of Application.
- Measurement in the area of relative, differential or absolute pressure.
- Also available in Ex Version meets all requirements for application in hazardous areas.
- PC Communication is possible.
|
| SPECIFICATION : |
TYPE |
DATA |
|
Range |
0 - 700 bar. |
| Units of Measurement |
mbar, bar, Pa, hPa, kPa, MPa, Kg/Cm², Kg/m², mmHg, cmHg, mHg, inHg, mmH2O, cmH2O, mH2O, inH2O, ftH2O, psi, lb/in2, lb/ft2, torr, atm. |
| Temperature Calibration |
0 – 50 ˚C |
| Power Supply |
3 x 1.5 V battery |
|
| top |
| Temperature Bath - |
FEATURES :
- Dry Block Type.
- Micro Controller based for higher accuracy.
- Interchangeability Inserts for different size of Sensors.
- Multi- hole insertion tube can be supplied as per requirement.
- Simultaneous display of both set points and process variable.
- Calibration Certificate from Govt. approved laboratory.
|
| SPECIFICATION : |
TYPE |
DATA |
 |
Range |
Ambient to 1200˚ C. |
| Accuracy |
± 1.0 to 3˚ C. |
| Well dia |
25 mm. |
| Well depth |
120 mm. |
| Supply |
220 V, 50 Hz |
| Communication |
RS 232 |
|
| top |
| Loop Calibrator - |
 |
- Hand held, Battery operated, Portable Sources and Sink for mV, mA & RTD (Pt100 DIN 43760)
- Pt100 Reading directly in terms of Temperature.
- Independent Calibration facility of mV, mA, Ohms, Temp.
- Optional battery eliminator for operation on 230 V AC.
- Optional Portable Loop Power Supply for 2 Wire Transmitter Calibration.
REFERANCE CLASS FOR INSTRUMENTS
A Very high accurate Indicator for Temperature, Humidity and Pressure for Calibration Purpose. |
| top |
| Mini Wind Tunner (for Air Velocity) - |
| FEATURES : Compact and User Friendly. |
| SPECIFICATION : |
TYPE |
DATA |
|
Velocity |
2.5 / 5/ 10 m/s, can be switched. |
| Length |
610 mm. |
| Range of Application |
+10 to +40˚ C |
| Motor |
Direct Current Fan. |
| Power Supply |
230 V / 50 Hz or 110 V can be switched. |
|
| top |
| Dead Weight Testers - |
 |
| top |
| Referance Class Instruments - |
 |
| Referance Class Instruments for Pressure, Temperature, Humidity etc. |
| top |
| Pressure Comparator - |
FEATURES :
- Rugged and highly accurate.
- Digital Readout.
- Easy to Operate.
|
| SPECIFICATION : |
TYPE |
DATA |
|
Maximum Pressure Generation |
10,000 psig or 700 barg. |
| Optional Digital Gauge Range |
100, 300, 500, 1000, 2000, 3000, 5000, 1000 psig. |
| Pressure Connection |
¼”, 3/8”, ½” BSP Female. |
| Compatibility |
Distilled Water / Hydraulic Oil. |
| Material |
Brass, Nickel Plated. |
|
| top |
| Huminator (Humidity Generator) - |
FEATURES :
- Fast and Easy Humidity Calibration of Measuring Instruments, Probes and Data Loggers
- Can be programmed individually.
- Uer Friendly.
- RS- 232 interface.
|
| SPECIFICATION : |
TYPE |
DATA |
|
Measuring Range |
+15 to +40˚ C / +5 to +95% RH. |
| Accuracy |
0.5˚ C |
| Power Supply |
85 to 264 V AC, 47 to 63 Hz. |
| Connection |
RS- 232 interface. |
|
| top |
| Universal Calibrator - |
FEATURES :
- Hand held, Battery Operated, Portable.
- Pt 100 reading directly in terms of Temperature.
- Independent Calibration facility for mV, mA, Ohms, Temp.
- Typical Accuracy 0.1% ± 1 digit.
- Operation battery eliminator for operation on 230V AC.
- Operational Portable Loop Power supply for 2 Wire Transmitter Calibration.
|
| SPECIFICATION : |
TYPE |
DATA |
|
Power Supply |
Two Batteries of 9V, Size PP3 (Optional) Battery Eliminator for230 V AC Operation |
| Indication |
4½ digit LCD display with battery low, over range & Polarityc Indication. |
| Operating Temp. |
0 to 50˚ C. |
| Humidity |
Max. 90% Rh Non Condensing. |
| Storage Temperature |
0 to 70˚ C. |
| Source / Sink |
mV, mA, Ohms, Temp |
|
| top |
|
