| FLOW |
|
| |
| Glass
Tube Rotameter |
 |
Features :
| |
TUBE
|
Borosilicate
Glass |
| |
Float |
SS 316,
PTFE, Other on request. |
| |
PACKING |
Neoprene,
PTFE, Silicon, Viton,. |
| |
END FITTINGS |
Mild Steel,
Carbon Steel, SS 304, SS 316, CF- 8M, CF8,
Cast Iron, PTFE lined, SS lined, PVC any other
material on request. |
| |
FRAME &
COVER |
Mild Steel,
SS (Optional) |
Specifications :
| |
REPEATABILITY
|
0.5% |
| |
ACCURACY
|
±
2% of full flow. |
| |
RANGEABILITY
|
10 : 1 |
| |
SCALE LENGTH
|
175 - 200
MM (upto 250 mm) |
| |
MAX. TEMPERATURE |
Upto 200°
(depending upon gland packing material |
| |
CONNECTION
|
Flanged
or Threaded. |
| |
ENCLOSURE |
IP 55 or
IP 65 |
|
|
| |
| Go
To Top |
| |
| Metal
Tube Rotameter |
 |
Features :
| |
MATERIAL
OF CONSTRUCION
|
SS
316, SS 316L, SS 304, Hastelloy C, Titanium. |
| |
INLET OUTLET
CONNECTION |
Vertical
(Inlet bottom, Outlet top)Side Conn. |
| |
TYPE OF
CONNECTION |
Flange,
Screwed |
Specifications :
| |
ACCURACY
|
±
of fully flow, 1.5% of full flow (Optional) |
| |
REPEATABILITY
|
0.5% |
| |
RANGEABILITY
|
10 : 1 |
| |
SCALE LENGTH
|
90°
Angular |
| |
PRESSURE
RATING |
40 bar,
250 bar (Optional) |
| |
FLUID TEMP.
|
- 20°
to 250° C. |
| |
CONNECTION |
Flanged,
Threaded, Sanitory fitting. |
| |
PROTECTION
CLASS |
IP 65 (on
request) |
| |
OPTIONAL
ACCESSORIES |
Electronic
Transmitter with 4-20 mA O/P, Digital Flowrate
Indicator Totaliser. Minimum or Maximum Flow
Switch. |
| |
|
|
|
|
| |
| Go
To Top |
| |
| Bye
Pass Rotameter |
 |
Specifications
:
| |
CARRIER
RING
|
316
SS / Mild Steel / C.S. |
| |
ORIFICE
PLATE |
316 SS
/ Ebonite / Haste Alloy |
| |
PIPE LINE
|
316 SS
/ Mild Steel / C.S. |
| |
WETTED
|
316 SS
/ Mild Steel / C.S. or Rubber lines Steel
/ |
| |
PARTS |
PTFE lined
Steel. |
| |
ACCURACY
|
±
2% of full flow. |
| |
RANGEABILITY
|
7 : 1 or
5 : 1, 10 : 1 on request. |
| |
ACCESSORIES
|
High &
Low Flow Alarms. |
|
|
| |
| Go
To Top |
| |
- FLOW ELEMENTS
ORIFICE ASSEMBLY
|
 |
| |
| Go To Top |
| |
- ELECTRO MAGNETIC
FLOWMETER
ELECTRO
MAGNETIC FLOWMETER |
 |
Specifications
:
| |
ACCURACY
|
±0.5%
of flow rate. |
| |
LIQUID
CONDUCTIVE |
5 Micro
Siemens or better. |
| |
LINE SIZE
|
1/2"
TO 12" (10 NB to 300 NB) |
| |
PRESSURE
|
Upto 40
bar. |
| |
TEMPERATURE
|
60°
for Neoprene lining. |
| |
LINING
MATERIAL |
Neoprene,
PTFE. |
| |
ELECTRODE
MATERIAL |
SS 316
L, Hastelloy C, Titanium, other on request. |
| |
PROTECTION
|
IP 65,
IP 67. |
| |
CURRENT
OUTPUT |
4 to 20
mA, Isolated, 600 Ohms load. |
| |
|
|
|
|
| |
| Go To Top |
| |
|
ULTRASONIC
FLOWMETER |
 |
Features :
|
Minimum
Installation effort and cost. .
No Process Interruption, No plant shutdown.
.
Measurement is independent of fluid conductive,
temperaute and pressure. .
No contact with medium required, no corrosion
when use with aggressive media. |
Specifications :
| |
ACCURACY
|
1
to 3% of measured value depending on application. |
| |
OPERATING
TEMPERATURE |
- 10 TO
60° |
| |
OUTPUT
|
Current
(0/4 - 20 mA), Voltage, Frequency, Pulse,
Relay. |
| |
SERIAL
INTERFACE |
RS 232 |
|
|
| |
| Go To Top |
| |
|
 |
| |
| Go To Top |
| |
|
Thermal Mass Flowmeter |
 |
Application
:
|
Thermal
Mass Flowmeters and Controllers for gas
and liquid application with an electric
housing suitable for laboratory condition.
This are design to control flow range between
0...1 ml/min and 0...1250 l/min with pressure
rating between vacumm and 400 b |
|
|
|
| |
| Go To Top |
| |
|
|
|
