| |
|
|
| SPECIFICATION : |
TYPE |
DATA |
|
Input |
0 / 4 – 20 mA DC, 0 / 1 – 5 V DC. |
| RTD Pt- 100 3 Wire, Thermocouple (J, K, R, S, T, B) Display |
4½ digit LED |
| Output Relays |
1 NO + 1 NC Per Set Point, Rated at 230 V AC, 5 A Resistive load. |
| Transmitter Power Supply |
24 V DC, 30 mA |
| Retransmission Output |
4 to 20 mA (Isolated). |
| Programming |
All parameters programmable by front key pad. |
| Supply |
230 V AC, 50 Hz. |
| Mouting |
Flush on panel. |
| Dimensions (Cutout) |
92 x 92 mm / 138 mm x 68 mm / 92 mm x 45 mm. |
| |
|
|
| |
|
|
| PID Controller - |
FEATURES :
- Minimum Start up Overshoot.
- Ultra Stable Straight line Control.
- Quickest Disturbance Recovery.
|
| |
|
|
| SPECIFICATION : |
TYPE |
DATA |
|
Input |
Universal, 0 / 4 – 20 mA DC, 0 / 1 – 5 V DC. |
| RTD Pt- 100 3 Wire, Thermocouple (J, K, R, S, T, B) Accuracy |
± 0.25% of reading, ± 1 LSD, ± 1˚ C. |
| Measuring Rate |
5 Samples per Second (Sampling time 200 mS) |
| Ramp / Soak |
Built- in |
| Output |
Upto 3 Output. Universal, User Selectable. |
| Communication |
Possible. |
| Supply Voltage |
85 to 264 V AC, 50 / 60 Hz. |
| |
|
|
| |
|
|
| BAR Graph Indicator - |
FEATURES :
- Microprocessor Based Fully Programmable.
- Graphical / Digital Process Parameters Indication.
- Single / Dual Channel.
- Universal Input.
- Isolated Retransmission Output.
- Built- in Auto Manual Operation.
|
| |
|
|
| SPECIFICATION : |
TYPE |
DATA |
|
Input |
0 / 4 – 20 mA DC, 0 / 1 – 5 V DC. RTD Pt- 100 3 Wire, Thermocouple (J, K, R, S, T, B) |
| Range |
Calibrated as per requirement from front key pad. |
| Display |
1) 51 Segment LED bargraph x 2 Nos.
2) 4 digits, 0.3” red LED x 1 No. or 2 Nos. for digital read- out. |
| Output Relays |
2 Relays Per channel, 1 NO + 1 NC per relay, Rated at 230 V AC, 5 A Resistive load. |
| Retransmission Output |
4 to 20 mA x 2 Nos. (Isolated). |
| Programming |
All parameters programmable by front key pad. |
| Communication Port |
RS 232 or RS 485 with MODBUS RTU (Optional) |
| Supply |
230 V AC, 50 Hz. |
| Mouting |
Flush on panel |
| Dimensions (Cutout) |
92 x 92 mm / 138 mm x 68 mm. |
| Operating Temperature |
0 to 50˚ C |
| Humidity |
90% maximum |
| |
|
|
| |
|
|
| Process Scanner - |
FEATURES :
- Universal Input
- Serial Port RS 232 or RS 485 Port with MODBUS RTU Protocol.
- Channel Skip Facility
- Fully programmable from front key pad.
- Individual Set- Points programmable for each channel.
|
| |
|
|
| SPECIFICATION : |
TYPE |
DATA |
|
Input |
0 / 4 – 20 mA DC, 0 / 1 – 5 V DC. RTD Pt- 100 3 Wire, Thermocouple (J, K, R, S, T, B) |
| Range |
Calibrated as per customer requirement from front key pad. |
| Display |
1) 4 digit, ½” red LED for Process Value.
2) 2 digit, ½” red LED for Channel Number. |
| Modes |
Auto / Manual. |
| Display Update Time |
Programmable from 2 Sec. to 30 Sec. |
| Set Points |
Two Nos. programmable for each channel (optional) |
| Output Relays |
4 Relays, 1 NO + 1 NC Per relay common for all channel, Rated at 230 V AC, 5 A Resistive load. |
| Alarm Indication |
Provided by individual LED’s on front. |
| Retransmission Output |
4 to 20 mA (Isolated) |
| Programming |
All parameters programmable by front key pad. |
| Supply |
230 V AC, 50 Hz. |
| Mouting |
Flush on panel |
| Dimensions (Cutout) |
138 mm x 68 mm |
| |
|
|
| |
|
|
| Signal Converters / Isolators / Multipiler - |
FEATURES :
- Wide range of mV, TC, RTD, Current, Voltage, Slide Wire Transmitters and Alarm.
- Upto four Isolated Outputs.
- Three Port Isolation provided (between input, output and power supply)
- Front panel access for span, zero and set- point adjustments.
- Single or dual set- point for alarm trip module.
- DIN Rail, back of panel mounting.
|
| |
|
|
| SPECIFICATION : |
TYPE |
DATA |
 |
Input |
0 / 4 – 20 mA DC, 0 / 1 – 5 V DC. RTD Pt- 100 3 Wire, Thermocouple (J, K, R, S, T, B) |
| Output |
1) 4 – 20 mA DC, 2) 0/1 to 5 V DC, 3) 0/2 to 10 V DC. |
| No. of Outputs |
Upto 4 Nos. Provided. |
| Alarm Contacts |
2 NO + 2 NC Potential- free contacts rated at 230 V AC, 5 A resistive. |
| Isolation |
> 100 M Ohms at 500 V DC. |
| Transmitter Supply |
24 V DC, 30 mA for powering two wire transmitter. |
| Accuracy |
< ± 0.2% of FSD |
| Supply |
230 V AC, 50 Hz. |
| Mounting |
DIN Rail / Back of panel. |
| Dimension |
1) 56 mm (W) x 120 mm (D) x 132.5 mm (H)
2) 20 mm (W) x 140 mm (D) x 132.5 mm (H)
3) 60 mm (W) x 110 mm (D) x 70 mm (H) |
| Operating Temp. |
0 to 50˚ C |
