ULTRASONIC LEVEL MEASUREMENT

Ultrasonic Level  Transmitters and Level Switches are available in 2 wire / 3 wire, with or without controller for level measurement of liquid as well as solid materials present inside the tanks / silos etc.  Range available from 1 Mtrs. Up to 60 Mtrs. Compatible to different versions of communication.  (Output- 4 – 20 mA, &  Relay) IP protection, Approvals.

RADAR LEVEL MEASUREMENT

• Radar Level Transmitters available in 2 wire / 4 wire versions.
• Frequency-  6 GHz to 78 GHz.
• Available in measuring range up to 100 mtr.
• Temp. withstand up to 200 deg.C.
• Communications- HART, PROFIBUS PA, FOUNDATION, Fieldbus.
• IP Protection, Approvals

MAGNETIC FLOAT OPERATED GUIDED LEVEL TRANSMITTER.

• Continuous ‘Float type’ analog sensor, in materials, resistive to most liquids
• 2 wire, 4-20 mA output.
• Adjustable, Multiple Alarm Relays.
• Customised length up to 5.5 Mtrs.
• Intrically safe option available.
• IP Protection Approvals

CAPACITANCE TYPE LEVEL TRANSMITTER.

• 2 Wire, 4-20 mA output (loop powered)
• Wide range of services like corrosive, low conductive & dielectric medium.
• Also suits free flowing slurries, effluent water.

MAGNETIC FLOAT OPERATED PIVOTED LEVEL SWITCH.
Applications :- Liquid

• Mounting-  Side / Top
• Process Connection- Flanged or Screwed
• Max. Pressure- 20 Kg/Sq.Cm.
• Max. Temp. – 350 deg.C.
• Switch Enclosure : Cast AL, Weatherproof to IP 56 / IP65 or Ex- proof for gr IIA & IIB or IIC
• Accessories (Optional) : External cage,  Counter flange with nuts, bolts and gasket.

MAGNETIC, FLOAT OPERATED GUIDED LEVEL SWITCH.

• Hermetically sealed glass encapsulated reed switch.
• Option of remote or integral control unit.
• Option of remote counter & totaliser for volume application.
• Option of Intrinsically safe switch with zener barrier.
• Max. Temp. – 150˚ C
• Max. Pressure – 25 Kg/cm²
• Special Features : Intrinsically safe to Ex ib Gr IIA- IIB T6 (with zener barrier 24 VDC/110 mA)

DISPLACER TYPE MAGNETIC LEVEL SWITCH.

• Wide choice of switching functions.
• Suitable for large tanks up to 15 Mtrs.
• Site Adjustable switch points.
• Customised for high temp., high pressure & vacumm service.
• Reliable performance in turbulent liquids even without still pipes.
• Enclosure : W-proof- IP- 66, Ex- proof- Gr IIA & IIB or IIC.

CHAMBER FLOAT TYPE MAGNETIC LEVEL SWITCH.

• Magnet Switching System designed to achieve ‘Snap Action’
• Suitable for external or inline mounting.
• Variety of chambers in different MOC’s.
• Enclosure : W-proog- IP- 56, IP- 65, Ex- proof IIA & IIB or IIC

CONDUCTIVITY TYPE LIQUID LEVEL SWITCH.

• For conductive liquids, having low densities, high viscosities, containing solid particles and interface between non conductive and conductive liquids.
• Available in Solid and Suspended probes.
• Enclosure : Cast Al, W.proof IP- 66, Ex- proof Gr. IIA & IIB or IIC.
• Option – Auto / Manual mode thro’ toggle switch can be provided in controller if reuired.

FLOAT OPERATED TILT TYPE LIQUID LEVEL SWTICH.
Widely used in sumps, sewerage, factory drainage, sludge & highly glutinous liquids and soil water containing suspensions for automatic switching of pumps.

AIR OPERATED DIAPHRAGM SWITCH

• Suitable for liquids, especially high viscosity liquids, sewage, dirty oil etc. in vessel under atmosphearic conditions.
• Enclosure – Cast Al, WP IP- 65.
• Diaphragm – Neoprene.
• Temp. Range – 0 - 60˚ C
• Pressure Rating- Atmospheric.

RF ADMITTANCE POINT LEVEL SWITCH

• High reliability as coat guard technique ignore material built-up on the probe.
• Suits highly dusty environment.
• Field selectable operation logic to configure either high or low level switching.
• Suitable for powder, pellets, slurry, sludge etc.

ROTARY PADDLE LEVEL SWTICH.

• Used for detecting the level of free flowing solids / bulk materials.
• Power Supply : 110 or 220 V AC  ± 10% (50 – 60 Hz)
• Operating Temp. - -10 to 150˚ C
• Installation : Side / Top / Angular.
• Enclosure : Cast Al or ABS x W.Proof  IP- 65 as per IS 13947 – 1993.

VIBRATING FORK POINT SWITCH.

• Used for liquid as well as free flowing powder, grains and granular solids.
• Based on Piezo driven technic.
• Fail safe design.
• Unaffected by environmental changes e.g. temperature, pressure, humidity.
• Ex- proof version Gr IIA & IIB for hazardous application.

TRANSPARENT GLASS TUBE LEVEL GAUGE.

• Reflex & Transparent Flat Glass level gauges are design for safe and positive visual indication of liquid level in vessels under high pressure & temperature conditions.
• Connection type : Hook up / Straight thru.
• Process Connection : 20 /25 NB flanges to various standards.
• OPTIONAL – Illuminator, Frost Free extension, Jacketing for heating / cooling, Auto Ball check.

FLOAT & BOARD TANK GAUG FOR LIQUIDS.
Liquid storage tanks having corrosive fumes / vapours as well as tanks having pressure max. up to 1 Kg/Sq.Cm..
Optional- Adjustable Switch.

FLOAT & DIAL GAUGE.

• Suitable for liquid sumps, Floating Roof, Gas holding tank.
• Measuring Range : up to 15 Mtrs.
• Least Count : 5 mm.
• Max. Temp. : 150˚ C.
• Max. Pressure : Atm.
• OPTIONAL – Adjustable Switch,  Transmitter.